- 非IC关键词
上海艾斯达电子
- 卖家积分:
营业执照:已审核经营模式:经销商所在地区:上海 上海市企业网站:
http://WWW.ASDDZ.COM
收藏本公司 人气:3186252
企业档案
- 相关证件:
 
- 会员类型:
- 会员年限:18年
- 阿库IM:
- 地址:上海北京东路668号赛格电子市场G537室
- 传真:021-51571116
- E-mail:isd99@163.com
产品分类
集成电路(IC)(6)
电源IC(1)
半导体存储器(38)
二极管(14)
场效应管MOSFET(8)
可控硅IGBT(13)
单片机(4)
电容器(28)
电阻器(2)
电源/稳压器(53)
连接器/接插件(64)
开关(118)
传感器(1120)
保险丝(8)
普通电池/蓄电池/动力电池(48)
变压器(2)
变送器(119)
继电器(36)
变频器(78)
逆变器(3)
放大器(16)
电线电缆(22)
光电子/光纤/激光(24)
微特电机(11)
显示屏/显示器件/配件(14)
PLC/可编程控制器(74)
编码器(50)
安防监控器材(18)
IT/电子产品成套件(86)
电子测量仪器(569)
电子产品试验设备(2)
电子产品制造设备(2)
仪器/仪表(1799)
电子材料(4)
防静电产品(2)
五金/工具(200)
其他未分类(350)
相关产品
产品信息
岩崎IWATSU示波器电流探头SS-250,30A
、日本岩崎IWATSU 半导体曲线图示仪IGBT测试系统CS-3100 CS-3200 CS-3300产品简介:
产品简介:IWATSU岩崎(岩通计测) CS-3000大功率晶体管特性图示仪,分为CS-3100/3200/3300,峰值电压:3000V,峰值电流:1000 A,支持漏电流(LEAKAGE)测试模式(光标分辨率:1 pA),测量IGBT、MOSFET\VDMOS、三极管等功率半导体的耐压、漏电流、导通电阻、输出曲线等参数, IWATSU岩崎(岩通计测) CS-3000大功率晶体管特性图示仪,分为CS-3100/3200/3300,峰值电压:3000V,峰值电流:1000 A,支持漏电流(LEAKAGE)测试模式(光标分辨率:1 pA),测量IGBT、MOSFET\VDMOS、三极管等功率半导体的耐压、漏电流、导通电阻、输出曲线等参数
Supports various applications
Displays its capabilities in full force in current waveform observation and wide-band applications such as switching power supplies, optical disc manufacturing lines, and semiconductor power devices.
Features
Low noise characteristics for easy milliampere order observation
Wide bandwidth - DC to 100 MHz (SS-250)/DC to 50 MHz (SS-240A)
High sensitivity and wide bandwidth implemented through use of thin-film Hall element
Power can be provided directly from the oscilloscope
(Models with on-board power supplies for Iwatsu probes: TS-81000, TS-80600, SS-7840H, SS-7840, SS-7830
Models that are no longer available: TS-8500, SS-7825 and others with on-board power supply connectors)
Clamp type, enabling easy measurement without having to disconnect the electrical circuit
Equipped with a function that provides simple protection for excessive input
Can also be used with measuring instruments that do not have a power supply for probes (power can be provided through the optional probe power supply PS-26)
Specifications
Item
SS-250
SS-240A
Bandwidth
DC to 100 MHz
(-3dB)
DC to 50 MHz
(-3dB)
Maximum input current
Maximum input range
30 A rms
30 A rms
Maximum peak current
50 A peak, non-continuous
50 A peak, non-continuous
50 A peak at pulse width <= 10 μs
Output sensitivity
0.1 V/A
Sensitivity accuracy
•±1.0% of reading ±10 mA for probes only (in the range from 0 to 30 A rms, DC, and AC 45 to 66 Hz)
•±2.0% of reading for probes only (50 A peak or less and over 30 A rms, DC, and in the range of AC 45 to 66 Hz)
Noise
2.5 mA rms or less (observation using an oscilloscope with a 20 MHz band)
Power consumption
5.3 VA max.
5.6 VA max.
Power supply voltage
±12 V ±0.5 V
Operating temperature and humidity
0°C to +40°C, 80% RH or less
(no condensation)
Storage temperature and humidity
-10°C to +50°C, 80% RH or less
(no condensation)
Operating elevation
2000 m or less (air pressure approx. 79 kPa), indoor
Effects of external magnetic field
5 mA max. or equivalent (in DC, 60 Hz, 400 A/m AC magnetic field)
20 mA max. or equivalent (in DC, 60 Hz, 400 A/m AC magnetic field)
Maximum usable circuit voltage
300 V, CAT I (insulating conductor)
Conductor diameter that can be measured
ø 5 mm
Cable length
Sensor cable
Approx. 1.5 m
Power cable
Approx. 1 m
Size
Sensor part
Approx. 175 (W) x 18 (H) x 40 (D) mm
Termination part
Approx. 27 (W) x 55 (H) x 18 (D) mm
Weight
Approx. 240 g
Approx. 230 g
Complied with standards
Safety
EN61010-2-032:2002
Measurement category I (expected overvoltage: 1500 V),
Pollution degree: 2
EMC
EN61326:1997+A1:1988+A2:2001
Accessories
Instruction manual (1),
hard case (1)
Instruction manual (1),
soft case (1)
*
Values for performance/accuracy items are at 23°C ±5°C and 30 minutes after power-on.
Characteristics figures
SS-250 Continuous maximum input range (frequency derating)
SS-240A Continuous maximum input range (frequency derating)
*
These current probes can be used as-is with oscilloscopes that feature power supply connectors for active probes. Current probes can also be used with oscilloscopes without power supply connectors for active probe, when used in combination with the power supply (PS-26) that is sold separately.
*
Use a jack plug conversion BNC plug adapter for oscilloscopes for which connection to the SS-250/SS-240A is obstructed due to the input BNC connector being built into the external case (Iwatsu product DS-8710/8706).
*
When the SS-250/SS-240A is used with an oscilloscope with a power supply for a probe, if the current being measured is large, the power supply for current probe PS-26 may be required.
*
With the power supply for current probe PS-26, if the current being measured is large, it may not be possible to use two SS-250/SS-240A units at the same time.
Caution
1.
Use this product in circuits that do not exceed the maximum usable circuit voltage, so as to avoid accidents such as short-circuits and physical injuries.
2.
Do not use this product with bare conductors, so as to avoid accidents such as physical injuries and short-circuits when the leading end of the clamp core is opened.